Photo: Charged Cycle Works
EBMX · Fits Sur-Ron / Talaria / E Ride Pro
EBMX X-9000 V3
Based on manufacturer and retailer listings when we last checked, not confirmed stock. Check the store before you buy.
The common big-power swap for Sur-Ron and Talaria. V3 (shipping since July 2025) claims 1,000 A continuous phase current and works up to 22S packs.
⚠ Some specs on this page haven't been independently verified yet. Check the labels.
Compare with other controllers →
Where to buy
-
Charged Cycle Works$1,164
Prices change. Check the store before you buy. Two Wheel Current doesn’t sell anything. Some of these are affiliate links or codes: if you buy through them, the store may pay us a small commission at no extra cost to you. It never changes which products or stores we list.
Specs
Electrical
| Voltage range | 48–93 V (up to 22S) | CLAIMED |
|---|---|---|
| Max phase current | 1,000 cont. / 1,600 burst A | CLAIMED |
| Max battery current | 700 A | CLAIMED |
Output
| Peak power | 50 kW (listed as "continuous") | CLAIMED |
|---|
Features
| Control type | FOC (custom EBMX VESC firmware) | CLAIMED |
|---|---|---|
| App / Bluetooth | X-Series app, Bluetooth module included | CLAIMED |
| Display | SW102T color display included | CLAIMED |
| Extras | IMU wheel-lift control, 6 power levels, 15+ battery profiles, OTA updates | CLAIMED |
Physical
| Cooling | Air-cooled heatsink (water-cooled option) | CLAIMED |
|---|---|---|
| Waterproof rating | IP67 | CLAIMED |
| Weight | Not listed | UNKNOWN |
Fitment
| Fits | Sur-Ron Light Bee & Ultra Bee; Talaria MX3/MX4/MX5 & XXX; E Ride Pro SS 2.0/3.0/SR; Rerode R1 | CLAIMED |
|---|
Pricing
| Price (US) | $1,199 | REPORTED |
|---|
Support
| Warranty | 2 years | CLAIMED |
|---|
Specs below are from the V3 kit listing at RadMoto USA. That listing calls the 50 kW figure "continuous", which reads like a peak number. Check it against EBMX documentation before using it in a video.
- Every X-9000 shipped since July 2025 is V3. V2 heatsinks fit V3, but V2 wiring harnesses do not.
- For comparison, the V2 was listed at 48–84 V, 1,000 A phase, 500 A battery current, 40 kW peak input, 35 kW peak output and 15 kW continuous (20 kW water-cooled). Source
- V3 was shown as sold out at RadMoto USA on Oct 8, 2026.
Sources
- radmotousa.com/products/ebmx-x-9000-v3-controller-kit
- chargedcycleworks.com/products/ebmx-x-9000-v3-kit
How we label specs
CONFIRMEDOfficially announced or documented
CLAIMEDManufacturer performance claim
REPORTEDCredible third-party reporting
RUMOREDNot confirmed
ESTIMATEDCalculated or inferred
UNKNOWNNot disclosed yet